https://www.wifiprovn.com/san-pham/cisco-sg250-50p-k9-50-port-gigabit/

Cisco SG250-50P-K9 50-port Gigabit Smart Switch

26,290,000 ₫

Tính năng kỹ thuật Cisco SG250-50P-K9:
48-port PoE+ Gigabit + 2-port Combo (RJ-45 + SFP). (Công suất tối đa mỗi port 30W, Công suất tối đa switch 375W);
Performance: Capacity in millions of packets per second (mpps) (64-byte packets): 74.41; Switching capacity in gigabits per second (Gbps) 100 Gbps.
Hỗ trợ Layer 3 routing : IPv4 routing : Up to 32 static routes and up to 16 IP interfaces; IPv6 routing; Layer 3 interface; Classless Interdomain Routing (CIDR); DHCP relay at Layer 3 Relay; User Datagram Protocol (UDP) relay.
Layer 2: Port grouping up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation, Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs), Head-of-line (HOL) blocking HOL blocking prevention.
Internet Group Management Protocol(IGMP) versions 1 and 2 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups.
Tham khảo datasheet về các tính năng của Switch : Performance, Layer 2 Switching, Layer 3 routing, Security, Quality of Service, Standards, IPV6, Management, Green (power efficiency) …

Mua ngay Gọi điện xác nhận và giao hàng tận nơi

Mô tả

Cisco SG250-50P-K9 50-port Gigabit Smart Switch

Tính năng kỹ thuật Cisco SG250-50P-K9:

Cisco SG250-50P-K9

48-port PoE+ Gigabit + 2-port Combo (RJ-45 + SFP). (Công suất tối đa mỗi port 30W, Công suất tối đa switch 375W);
Performance: Capacity in millions of packets per second (mpps) (64-byte packets): 74.41; Switching capacity in gigabits per second (Gbps) 100 Gbps.
Hỗ trợ Layer 3 routing : IPv4 routing : Up to 32 static routes and up to 16 IP interfaces; IPv6 routing; Layer 3 interface; Classless Interdomain Routing (CIDR); DHCP relay at Layer 3 Relay; User Datagram Protocol (UDP) relay.
Layer 2: Port grouping up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation, Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs), Head-of-line (HOL) blocking HOL blocking prevention.
Internet Group Management Protocol(IGMP) versions 1 and 2 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups.
Tham khảo datasheet về các tính năng của Switch : Performance, Layer 2 Switching, Layer 3 routing, Security, Quality of Service, Standards, IPV6, Management, Green (power efficiency) …

Đặc tính kỹ thuật của Cisco SG250-50P-K9:

Model	SG250-50-K9
Performance
Switching capacity and forwarding rate	Capacity in Millions of Packets per Second (mpps) (64-byte packets): 74.41 Switching Capacity in Gigabits per Second (Gbps): 100
Jumbo frames	Frame sizes up to 10 KB supported on 10/100 and Gigabit Ethernet interfaces (9 KB for SG200-08 and SG200-08P)
MAC table	Up to 8,000 MAC addresses
Total system ports	50 Gigabit Ethernet
RJ-45 ports	48 Gigabit Ethernet
Uplink ports	2 Gigabit Ethernet combo
Layer 2 Switching
Spanning Tree Protocol (STP)	Standard 802.1d STP support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Port grouping	Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP): Up to 4 groups, Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN	Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs). 16 VLANs supported in SG200-08 and SG200-08P Port-based and 802.1Q tag-based VLANs
Voice VLAN	Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
Internet Group Management Protocol (IGMP) versions 1 and 2 snooping	IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups (16 for SG200-08 and SG200-08P)
Head-of-line (HOL) blocking	HOL blocking prevention
Security
IEEE 802.1X (Authenticator role)	802.1X: RADIUS authentication, MD5 hash
Port security	Locks MAC addresses to ports, and limits the number of learned MAC addresses
Storm control	Broadcast, multicast, and unknown unicast
DoS prevention	DoS attack prevention
Quality of Service
Priority levels	4 hardware queues
Scheduling	Strict priority and weighted round-robin (WRR) Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
Class of service	Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
Rate limiting	Ingress policer, per VLAN and per port
Power over Ethernet
802.3af PoE or 802.3at PoE+ delivered over any of the RJ-45 network ports within the listed power budgets	Switches support 802.3af, 802.3at, and Cisco pre-standard (legacy) PoE with maximum power of 30 W per port. This applies to the following PoE-enabled models; the maximum number of ports providing PoE power simultaneously is determined by the total PoE budget for the switch listed as below: PoE Power Budget: 45 W Number of Ports That Support PoE: 8
Pre-standard PoE	Support Cisco Pre-Standard PoE
Intelligent PoE power management	Support the granular power negotiation with CDP/LLDP communication with PD devices after IEEE classification
Environmental
Dimensions (W x H x D)	440 x 44 x 257 mm
Unit weight	2.94 kg
Power	100 to 240V 50 to 60 Hz, internal, universal